The Quick Wick ® Fire Hoop Wick
Turn any hoop into a firehoop. This ultra-light fire hoop wick clamps onto any hoop (or any tube, pole, staff, bike axle, etc). The Quick Wick® allows you to change your fire hoop size as your regular hoop size evolves.
Use Quick Wicks® on different hoops, taped or bare, minis & LED hoops. (note: this could void a warranty on an LED hoop) Other ideas: throw some on the end of a staff, a bike, a helmet, get creative. The paper-thin belt is virtually unnoticeable when hooping and the clamp does not get hot.
See also:
Quick Wick Iso
Quick Wick Pro
- Free Nut Driver w/ orders of 5 or more Quick Wicks
Scroll down for details, fulfillment timing and more info..
$25.95 USD$29.95 USD
Details, Fulfillment Timing & More Info...
The main difference between the crown knot wick head and the barrel-style (aka sushi wrap) is the absence of any metal fastening the crown knot itself. Otherwise, they are similar size, similar weight, hold a similar amount of fuel and therefore have similar burn times.
- Wick heads are approximately 1.5" tall x 1.5" wide.
- Flexible cable-spine is rigid, like a rod, but springs back into shape when bent.
- Spines are approximately 5 inches long from the outside of the tubing to the tip of the wick head.
- Different clamp sizes available for different tubing diameters.
- Weigh approximately 1.8 ounces (about the weight of 6 quarters).
- Stainless Steel construction for the best resistance to rust.
- Designed to last several lifetimes if properly cared for.
- Hand-made in North Carolina, U.S.A.
Quick Wick® Sizes
(measured by the Outside Diameter of your tubing)
- 5/8" OD (14 - 16 mm)
- 3/4" OD (19 - 20 mm)
- 7/8" OD (21 - 22 mm)
- 1.1" OD (23 - 26 mm)
- 1.1"+ add additional clamps to increase the clamping range for larger diameters like Lyras, Bicycles, Poles, etc..
If you are unsure of the Outside Diameter of your tubing (not hoop OD), please measure it. It is important to get the correct size Quick Wick®.
A clamp meant for larger tubing *can* be clamped down onto thinner tubing, but the "tail" from the belt of the clamp will stick out further and can snag on your clothing or scratch you.
The increments are very small so precision counts. If you can't measure the Diameter of your tubing, but have measuring tape (or a piece of string), you can measure the circumference..
5/8" Diameter = 1.96" Circumference
3/4" Diameter = 2.35" Circumference
7/8" Diameter = 2.75" Circumference
1.1" Diameter = 3.45" Circumference
2.2" Diameter = 6.91" Circumference
3.3" Diameter = 10.36" Circumference
See also:
- All About Tubing (types & sizes)
- How to Trim QW Clamps
- Kevlar Sleeves ..fire dancers' best friend
- Quick Wick Reviews
Shipping, Fulfillment, Returns & Exchanges
- For shipping cost of your order, use the Shipping Rates Calculator in the shopping cart (items must be in cart).
- See our Shipping Info page for details about fulfillment & delivery time.
- Customers are responsible for paying shipping costs on returns/exchanges.
-
Used fire gear of any kind cannot be returned or exchanged.
Backed by a LIFETIME WARRANTY on manufacturing and our Lifetime Replacement Program.
Free Nut Driver w/ orders of 5 or more Quick Wicks
© 2009 Scott Crews, Synergy FlowArts, LLC
